With Glittering Eyes: June 2022: Difference between revisions
(Created page with "<br>When Shannon Lerner of Provocraft despatched an email to all Circle members who had registered for the Kentucky Crop, she mentioned that as a substitute of Make-and-Takes, she can be doing a YUDU demo. As a person who shouldn't be massive on Make-and-Takes, I used to be thrilled. I decided that I would pump her for each tip and get answered all of my questions from the true, dwell YUDU knowledgeable!<br> <br><br>She was so patient, answering all the things I threw at...") Â |
mNo edit summary  |
||
Line 1: | Line 1: | ||
<br>When Shannon Lerner of Provocraft | <br>When Shannon Lerner of Provocraft sent an electronic mail to all Circle members who had registered for the Kentucky Crop, she talked about that instead of Make-and-Takes, she can be doing a YUDU demo. As a person who shouldn't be big on Make-and-Takes, I was thrilled. I determined that I might pump her for each tip and get answered all of my questions from the actual, stay YUDU professional!<br><br><br>She was so patient, answering all the things I threw at her and letting me snap photos all along the way.<br><br><br>Armed with a notebook and digicam, I took notes and requested tons of questions. You can see all of Shannon's tips and strategies that she shared with us on my YUDU web page (click the tab at the highest on the blog, or click on right here). You will notice a link to a printer-pleasant model there. I extremely recommend printing it to have handy to your first challenge!<br><br><br>I took my YUDU and since it was used to successfully screen lots of tasks, I felt like my YUDU knew what to do. The subsequent day, I traipsed all over Louisville, on the lookout for Provocraft branded items.<br><br><br>Between three shops, I nonetheless didn't find the 70 mesh screen wanted to do flocking or the foil or flocking materials. After trying on the YUDU discussion board, I discovered a supply for liquid emulsion! $153 later, I had placed an order for chemicals, screens, and many options. I also discovered all the specialty YUDU products at cricut.com.<br><br><br>I decided that the only method to maintain my YUDU confidence was to keep display printing with what I had.<br><br><br>I requested my daughter to attract an image on white cardstock with a Sharpie.<br><br><br>Next, I used the transparencies that Joann's is clearancing and industrial filter mesh copied her drawing using my workplace copier.<br><br><br>Following Shannon's steps to YUDUing from my notes (and conserving the guide close by)...<br><br><br>...and despite utilizing the capillary emulsion sheets that got here with my YUDU that I had opened months in the past and [https://clamberet07.doodlekit.com/blog/entry/20431459/exactly-how-to-select-right-products-for-screen-printing-mesh industrial filter mesh] positioned again in the black bundle with out taping up, thus exposing the edges to light....<br><br><br>The blue areas were exposed in storage.<br><br><br>...I used to be in a position to efficiently burn my daughter's picture on the emulsion. Since her artwork was a lot smaller than the emulsion sheet, I was in a position to suit it on the great space. I used a number of painters tape to tape off the issue areas (and areas I was not using simply in case) and it labored beautifully.<br><br><br>Back aspect of the mesh frame.<br><br><br>Top aspect of the mesh body.<br><br><br>I had to put the shirt on the platen off-middle since my design was not in the center of the screen. Shannon informed us she never opened the shirt anymore to place the platen inside; she simply lays the shirt on prime of it - a lot quicker to take off! She says the ink will not bleed via any t-shirt except for a tissue tee.<br><br><br>Look how excellent this got here out!!!!<br><br><br>I heat-set it, utilizing a bit of paper as a press cloth.<br><br><br>The minute it got here out, my daughter informed me she wished to give it to her good friend Dylan. She tried it on for my picture...<br><br><br>...and the great thing about silk screening is that we had printed another off in no time... nicely, that may be a lie. My daughter needed hers printed in a different coloration so I needed to rinse and dry the screen. Since this was one other YUDU lesson for me, I accommodated her.<br><br><br>I really like how they turned out and so did she!<br><br><br>Applying the emulsion sheet was the hardest half. Making sure it adhered. Then the waiting! Letting it dry, rinsing it, and letting it dry again takes hours!!! That's the reason I stopped everything when i watched Cricut Circle's CraftySanSan's superior YUDU movies online. My jaw dropped when she demonstrated using her Cricut to cut Oracal 651 vinyl to use as a substitute of emulsion on her [https://squareblogs.net/bridgedrive02/just-how-to-pick-right-materials-for-display-printing-mesh coustic mesh] display screen. Not solely was it fast and as straightforward to use as any vinyl mission, but-- AND This is Big -- there is no such thing as a DRYING TIME!!!!! No ready for the emulsion to dry (no emulsion), no rinsing, no ready for the display to dry. We are talking instantaneous printing!!!!<br><br><br>Luckily, I had some 651 available. I used Twinkle Toes, flipping the image and using a kiss reduce (blade 3, pressure 3, speed 3) to cut the vinyl. If you beloved this article and also you would like to collect more info regarding industrial filter mesh - [https://godotengine.org/qa/index.php?qa=user&qa_1=smellseat31 https://godotengine.org] - i implore you to visit our own web site. I weeded the lettering, leaving the unfavourable space to use on the display. I applied it with transfer tape.<br><br><br>I used the squeegee to apply the switch-taped vinyl to the again of the display...<br><br><br>...after which rigorously peeled off the switch tape. I used painters tape to tape off all areas round it. On the video, she used scraps of extra Oracal 651, which might have been simpler when eradicating it for clean up. I centered the shirt. Pulled the ink by way of as traditional. I was pleasantly stunned that it labored!!!!<br><br><br>Why did I have it plugged in????? I did not need to expose something or dry anything! I let it dry. Heat set it with an iron. Then I broke out the iRock stencil and gems and my Jolee's Hotfix Crystal software, changing ends as needed for the different measurement stones.<br><br><br>A bit observe for subsequent time: place a chunk of paper inside the shirt earlier than applying heat. Although it wasn't damaging or noticeable, some of the gem glue went by means of to the again of the shirt! A tug on the shirt solved it, however that was a bit scary!<br><br><br>This shirt took 1 hour begin-to-end, together with deciding on a design, reducing the vinyl, display screen printing, cleansing the screens, letting the ink dry, heat setting the ink, and applying the gems. That was Awesome! Compared to the hours it took to do the first shirt (nearly all drying time so at the least I wasn't tied up), I positively see a bonus to using the vinyl. The only disadvantage: the edges are usually not as crisp. I am unsure if that was due to me on technique as a beginner or if it was the vinyl and its limitations. A couple of extra makes an attempt should answer that!<br><br><br>I can not wait to try the liquid emulsion! I have been promised that it is less complicated to apply than the capillary emulsion movie (and it positively is cheaper). I'll still have drying times with this product, unlike the vinyl, nonetheless, I won't be limited to Cricut cuts for my design... although with over 200 cartridges, I'm not all that restricted! Even so, Shannon instructed going to the Library of Congress website for black and white images to YUDU and that cannot be performed with the vinyl.<br><br><br>I am so excited that I noticed Shannon's YUDU demo! It allowed me to have the arrogance to begin playing with this superb machine! I can see that YUDU tasks shall be on the plan for the rest of the summer season...<br> |
Latest revision as of 09:26, 27 September 2022
When Shannon Lerner of Provocraft sent an electronic mail to all Circle members who had registered for the Kentucky Crop, she talked about that instead of Make-and-Takes, she can be doing a YUDU demo. As a person who shouldn't be big on Make-and-Takes, I was thrilled. I determined that I might pump her for each tip and get answered all of my questions from the actual, stay YUDU professional!
She was so patient, answering all the things I threw at her and letting me snap photos all along the way.
Armed with a notebook and digicam, I took notes and requested tons of questions. You can see all of Shannon's tips and strategies that she shared with us on my YUDU web page (click the tab at the highest on the blog, or click on right here). You will notice a link to a printer-pleasant model there. I extremely recommend printing it to have handy to your first challenge!
I took my YUDU and since it was used to successfully screen lots of tasks, I felt like my YUDU knew what to do. The subsequent day, I traipsed all over Louisville, on the lookout for Provocraft branded items.
Between three shops, I nonetheless didn't find the 70 mesh screen wanted to do flocking or the foil or flocking materials. After trying on the YUDU discussion board, I discovered a supply for liquid emulsion! $153 later, I had placed an order for chemicals, screens, and many options. I also discovered all the specialty YUDU products at cricut.com.
I decided that the only method to maintain my YUDU confidence was to keep display printing with what I had.
I requested my daughter to attract an image on white cardstock with a Sharpie.
Next, I used the transparencies that Joann's is clearancing and industrial filter mesh copied her drawing using my workplace copier.
Following Shannon's steps to YUDUing from my notes (and conserving the guide close by)...
...and despite utilizing the capillary emulsion sheets that got here with my YUDU that I had opened months in the past and industrial filter mesh positioned again in the black bundle with out taping up, thus exposing the edges to light....
The blue areas were exposed in storage.
...I used to be in a position to efficiently burn my daughter's picture on the emulsion. Since her artwork was a lot smaller than the emulsion sheet, I was in a position to suit it on the great space. I used a number of painters tape to tape off the issue areas (and areas I was not using simply in case) and it labored beautifully.
Back aspect of the mesh frame.
Top aspect of the mesh body.
I had to put the shirt on the platen off-middle since my design was not in the center of the screen. Shannon informed us she never opened the shirt anymore to place the platen inside; she simply lays the shirt on prime of it - a lot quicker to take off! She says the ink will not bleed via any t-shirt except for a tissue tee.
Look how excellent this got here out!!!!
I heat-set it, utilizing a bit of paper as a press cloth.
The minute it got here out, my daughter informed me she wished to give it to her good friend Dylan. She tried it on for my picture...
...and the great thing about silk screening is that we had printed another off in no time... nicely, that may be a lie. My daughter needed hers printed in a different coloration so I needed to rinse and dry the screen. Since this was one other YUDU lesson for me, I accommodated her.
I really like how they turned out and so did she!
Applying the emulsion sheet was the hardest half. Making sure it adhered. Then the waiting! Letting it dry, rinsing it, and letting it dry again takes hours!!! That's the reason I stopped everything when i watched Cricut Circle's CraftySanSan's superior YUDU movies online. My jaw dropped when she demonstrated using her Cricut to cut Oracal 651 vinyl to use as a substitute of emulsion on her coustic mesh display screen. Not solely was it fast and as straightforward to use as any vinyl mission, but-- AND This is Big -- there is no such thing as a DRYING TIME!!!!! No ready for the emulsion to dry (no emulsion), no rinsing, no ready for the display to dry. We are talking instantaneous printing!!!!
Luckily, I had some 651 available. I used Twinkle Toes, flipping the image and using a kiss reduce (blade 3, pressure 3, speed 3) to cut the vinyl. If you beloved this article and also you would like to collect more info regarding industrial filter mesh - https://godotengine.org - i implore you to visit our own web site. I weeded the lettering, leaving the unfavourable space to use on the display. I applied it with transfer tape.
I used the squeegee to apply the switch-taped vinyl to the again of the display...
...after which rigorously peeled off the switch tape. I used painters tape to tape off all areas round it. On the video, she used scraps of extra Oracal 651, which might have been simpler when eradicating it for clean up. I centered the shirt. Pulled the ink by way of as traditional. I was pleasantly stunned that it labored!!!!
Why did I have it plugged in????? I did not need to expose something or dry anything! I let it dry. Heat set it with an iron. Then I broke out the iRock stencil and gems and my Jolee's Hotfix Crystal software, changing ends as needed for the different measurement stones.
A bit observe for subsequent time: place a chunk of paper inside the shirt earlier than applying heat. Although it wasn't damaging or noticeable, some of the gem glue went by means of to the again of the shirt! A tug on the shirt solved it, however that was a bit scary!
This shirt took 1 hour begin-to-end, together with deciding on a design, reducing the vinyl, display screen printing, cleansing the screens, letting the ink dry, heat setting the ink, and applying the gems. That was Awesome! Compared to the hours it took to do the first shirt (nearly all drying time so at the least I wasn't tied up), I positively see a bonus to using the vinyl. The only disadvantage: the edges are usually not as crisp. I am unsure if that was due to me on technique as a beginner or if it was the vinyl and its limitations. A couple of extra makes an attempt should answer that!
I can not wait to try the liquid emulsion! I have been promised that it is less complicated to apply than the capillary emulsion movie (and it positively is cheaper). I'll still have drying times with this product, unlike the vinyl, nonetheless, I won't be limited to Cricut cuts for my design... although with over 200 cartridges, I'm not all that restricted! Even so, Shannon instructed going to the Library of Congress website for black and white images to YUDU and that cannot be performed with the vinyl.
I am so excited that I noticed Shannon's YUDU demo! It allowed me to have the arrogance to begin playing with this superb machine! I can see that YUDU tasks shall be on the plan for the rest of the summer season...